Neue Testversion 20.90b4

Hier diskutieren die Betatester von PhotoLine untereinander und mit den Entwicklern
User avatar
Gerhard Huber
Entwickler
Entwickler
Posts: 3990
Joined: Mon 18 Nov 2002 15:30
Location: Bad Gögging

Neue Testversion 20.90b4

Post by Gerhard Huber »

Hallo,

es gibt wieder eine neue Testversion 20.90b4.

Windows:
http://www.pl32.com/beta/pl2090b4.zip


Mac OS:
http://www.pl32.com/beta/plx2090b4.zip



Neues:

diverse kleine Fehler beseitigt
Paul
Mitglied
Posts: 235
Joined: Fri 19 Dec 2008 11:36

Re: Neue Testversion 20.90b4

Post by Paul »

Hi,
The names of the pages get only even numbers.
- Paul
You do not have the required permissions to view the files attached to this post.
Martin Huber
Entwickler
Entwickler
Posts: 3942
Joined: Tue 19 Nov 2002 15:49

Re: Neue Testversion 20.90b4

Post by Martin Huber »

Paul wrote: Wed 13 Dec 2017 22:09 The names of the pages get only even numbers.
I will fix that.

Martin
User avatar
Herbert123
Mitglied
Posts: 2009
Joined: Sat 12 May 2012 21:38

Re: Neue Testversion 20.90b4

Post by Herbert123 »

Small request for an aspect ratio view option that reads the meta data in a file.

Files that were saved with a different pixel aspect ration open in PhotoLine with the wrong visual aspect ratio.

Here is an example: http://www.wizzydev.com/uploads/kakekups_youtube.jpg

The pixel aspect ration is 1.5 - ideally PhotoLine would allow us to set a view option to change the pixel aspect ratio. PhotoLine would then read the meta data to correct the view for this aspect ration.

In addition, a custom pixel aspect ratio view setting would be required as well: when creating a new file for output with a different pixel aspect ratio (for example, 2:1) in the New Image/document dialog an additional option could be introduced to set a custom pixel aspect ratio. That would make it possible to work on images that require a custom pixel aspect ratio (so a circle drawn in PhotoLine would not suddenly become an oval in video editors).

Even better, it would be great if there'd be an option to convert any pixel aspect ratio to another one (resampling the image). For example, the above test image could then be automatically converted to a physical 1920x1080 resolution, and the 1.5 pixel aspect ratio meta data would be removed and replaced by the 1:1 entry.
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
Paul
Mitglied
Posts: 235
Joined: Fri 19 Dec 2008 11:36

Re: Neue Testversion 20.90b4

Post by Paul »

Hi,
I get double icons in text-related layer tools.
- Paul
You do not have the required permissions to view the files attached to this post.
Martin Huber
Entwickler
Entwickler
Posts: 3942
Joined: Tue 19 Nov 2002 15:49

Re: Neue Testversion 20.90b4

Post by Martin Huber »

Herbert123 wrote: Fri 15 Dec 2017 01:02 Small request for an aspect ratio view option that reads the meta data in a file.

Files that were saved with a different pixel aspect ration open in PhotoLine with the wrong visual aspect ratio.
That's not a small request.
PhotoLine currently has no support for aspect ratios other than 1, and it's quite a bit of work to implement it.
It should be possible to open them with the proper scaling (in document mode), but on export the aspect ratio will be lost (and will be 1).
Herbert123 wrote: Fri 15 Dec 2017 01:02 Here is an example: http://www.wizzydev.com/uploads/kakekups_youtube.jpg

The pixel aspect ration is 1.5
I can't find an aspect ratio of 1.5 in this file. It has two resolutions: one in the JFIF data and one in the EXIF data, and both resolutions result in an aspect ratio of 1.

Martin
Martin Huber
Entwickler
Entwickler
Posts: 3942
Joined: Tue 19 Nov 2002 15:49

Re: Neue Testversion 20.90b4

Post by Martin Huber »

Paul wrote: Fri 15 Dec 2017 10:07 I get double icons in text-related layer tools.
This will work in the next version.

Martin
User avatar
Herbert123
Mitglied
Posts: 2009
Joined: Sat 12 May 2012 21:38

Re: Neue Testversion 20.90b4

Post by Herbert123 »

Martin Huber wrote: Fri 15 Dec 2017 11:01
Herbert123 wrote: Fri 15 Dec 2017 01:02 Small request for an aspect ratio view option that reads the meta data in a file.

Files that were saved with a different pixel aspect ration open in PhotoLine with the wrong visual aspect ratio.
That's not a small request.
PhotoLine currently has no support for aspect ratios other than 1, and it's quite a bit of work to implement it.
It should be possible to open them with the proper scaling (in document mode), but on export the aspect ratio will be lost (and will be 1).
Herbert123 wrote: Fri 15 Dec 2017 01:02 Here is an example: http://www.wizzydev.com/uploads/kakekups_youtube.jpg

The pixel aspect ration is 1.5
I can't find an aspect ratio of 1.5 in this file. It has two resolutions: one in the JFIF data and one in the EXIF data, and both resolutions result in an aspect ratio of 1.

Martin
That's strange - when I open that file in Photoshop, it automatically turns on the [scaled] 1.5 pixel aspect ratio view mode.

I understand now that full support for different pixel aspect ratios would affect the entire application.
What would perhaps be an interim solution is to ask the user what to do with such a file - if a non 1-1 aspect ratio is detected, a dialog will pop up asking "do you want this file to be upscaled to 1920 width?

Or at least an indication somewhere that the document uses a different pixel aspect ratio.
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
Falaffel
Mitglied
Posts: 397
Joined: Sun 26 May 2013 12:33

Re: Neue Testversion 20.90b4

Post by Falaffel »

Bei mir fehlt im Speicherndialog bei der JPG-Einstellungen der Schieberegler für die Qualität bzw, wird dieser erst angezeigt, wenn man mit der Maus dort hinklickt, wo er sein müsste. in der B3 war das noch nicht so.
Grüße
Robert
User avatar
dutchman
Mitglied
Posts: 476
Joined: Thu 21 Nov 2002 18:46
Location: 72793 Pfullingen

Re: Neue Testversion 20.90b4 - Guidelines

Post by dutchman »

Hi all,
the guidelines won't function as a "snap-on" anymore.
Or I can't find the settings.
Options/display/guides will not work... these settings reacting very weird.
The ALT-button as described is also without any function at the guides.
Is someone has the same issue?
User avatar
Gerhard Huber
Entwickler
Entwickler
Posts: 3990
Joined: Mon 18 Nov 2002 15:30
Location: Bad Gögging

Re: Neue Testversion 20.90b4

Post by Gerhard Huber »

Dass die Hilfslinien in der Beta 4 nicht funktionieren, haben wir schon festgestellt. Wir werden das beheben.
User avatar
Gerhard Huber
Entwickler
Entwickler
Posts: 3990
Joined: Mon 18 Nov 2002 15:30
Location: Bad Gögging

Re: Neue Testversion 20.90b4

Post by Gerhard Huber »

Falaffel wrote: Sat 16 Dec 2017 22:16 Bei mir fehlt im Speicherndialog bei der JPG-Einstellungen der Schieberegler für die Qualität bzw, wird dieser erst angezeigt, wenn man mit der Maus dort hinklickt, wo er sein müsste. in der B3 war das noch nicht so.
Dieses Problem sehe ich in der Beta4 nicht, in der Beta3 aber schon. Bist du dir sicher, dass du das nicht verwechselst?
Falaffel
Mitglied
Posts: 397
Joined: Sun 26 May 2013 12:33

Re: Neue Testversion 20.90b4

Post by Falaffel »

Gerhard Huber wrote: Sun 17 Dec 2017 06:47
Falaffel wrote: Sat 16 Dec 2017 22:16 Bei mir fehlt im Speicherndialog bei der JPG-Einstellungen der Schieberegler für die Qualität bzw, wird dieser erst angezeigt, wenn man mit der Maus dort hinklickt, wo er sein müsste. in der B3 war das noch nicht so.
Dieses Problem sehe ich in der Beta4 nicht, in der Beta3 aber schon. Bist du dir sicher, dass du das nicht verwechselst?
Hallo Gerhard,

werde nachher nochmal testen.
Grüße
Robert
Falaffel
Mitglied
Posts: 397
Joined: Sun 26 May 2013 12:33

Re: Neue Testversion 20.90b4

Post by Falaffel »

Stimmt, das Problem bestand in der B3, in der B4 ist es nicht mehr vorhanden.
Grüße
Robert
User avatar
ellhel
Mitglied
Posts: 1337
Joined: Wed 04 Jan 2012 03:03
Location: Reiffelbach

Re: Neue Testversion 20.90b4

Post by ellhel »

Hallo,

toll das die Arbeitsebenenauswahl in der Beta mehrzeilig ausklappt. Kommt das irgendwann in die offizielle Version?

LG
Helmut
PhotoLine 21 & Betas, Win-10 Pro 64-bit, ACDSee Photo Studio Ultimate 2018, Dxo Optics Pro 9, Panasonic DMC-G6
"Der Nachteil der Intelligenz besteht darin, dass man ununterbrochen gezwungen ist, dazuzulernen."
George Bernard Shaw