How do I let my printer driver control color correction when printing?
I just started using a Canon Pro-100.
Dan
How to let printer driver control color
-
- Mitglied
- Beiträge: 5
- Registriert: Do 28 Okt 2010 17:32
- Wohnort: United States
-
- Mitglied
- Beiträge: 275
- Registriert: Mo 15 Sep 2014 01:27
Re: How to let printer driver control color
I never let the printer driver control color, but... My guess is that you'd setup the driver however desired with color management enabled in the driver settings, then in File>Print set the profile to "System"; anything else here would be a profile setting. Perhaps someone who prints this way will jump in, but it's easy enough to test...use a small sheet of paper...double profiling is easily recognized.
Good luck!
Good luck!
-
- Mitglied
- Beiträge: 5
- Registriert: Do 28 Okt 2010 17:32
- Wohnort: United States
Re: How to let printer driver control color
I think that's the answer I needed ! Thank you. (I was looking in printer properties).
-
- Mitglied
- Beiträge: 414
- Registriert: Sa 23 Apr 2016 17:03
Re: How to let printer driver control color
To control colour outputs you need the various profiles for paper/printer combinations. Until you get those you are really just taking a calculated swing at it.
My suggestion is to look at a printing program such as QImage. Then install the correct profiles for the paper/printer combination you are using.
regards
My suggestion is to look at a printing program such as QImage. Then install the correct profiles for the paper/printer combination you are using.
regards