Hi,
Does anyone have an example or small tutorial how I can generate a document with 500 QR-codes as tickets, preferably with ascending numbers?
It seems possible, but I can't find it in the handbook.
Thanks,
- Paul
Serial Barcode/QR code
-
- Entwickler
- Beiträge: 4145
- Registriert: Mo 18 Nov 2002 15:30
- Wohnort: Bad Gögging
Re: Serial Barcode/QR code
It's an undocumented feature, so there is no help in the manual.
You have to create a document first, with as many pages as you want to get tickets - 500 pages in your example.
The syntax in the barcode panel is
{p:13}text{##} or {#3}
where 13 is the start number.
{##}creates a number with 2 digits {#3} with 3 digits.
my example would create
text13 or 013
on the first page
text14 or 014
on the second and so on.
-
- Mitglied
- Beiträge: 235
- Registriert: Fr 19 Dez 2008 11:36
Re: Serial Barcode/QR code
Great, thanks!
With a little careful editing I can place all the codes in the position that I want and with a virtual background layer do the rest of the design on the tickets.
- Paul
With a little careful editing I can place all the codes in the position that I want and with a virtual background layer do the rest of the design on the tickets.
- Paul
-
- Mitglied
- Beiträge: 235
- Registriert: Fr 19 Dez 2008 11:36
Re: Serial Barcode/QR code
Now I think of it: would it be possible to set the position (x,y) of the QR code when creating it? For one QR code it's not important, but for a serial document it would make things very much easier, e.g. when placing all the codes in the right lower corner of a ticket.
Assigning a colour would be nice, too...
- Paul
Assigning a colour would be nice, too...
- Paul
-
- Entwickler
- Beiträge: 4145
- Registriert: Mo 18 Nov 2002 15:30
- Wohnort: Bad Gögging
Re: Serial Barcode/QR code
You can setup the position of the Barcode:
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
-
- Mitglied
- Beiträge: 235
- Registriert: Fr 19 Dez 2008 11:36
Re: Serial Barcode/QR code
Gee, sorry, I missed that one. I was too preoccupied with the code...
- Paul
- Paul