Great! I like that because then there are fewer anchor points to deal with. Thanks!Eurgail wrote:But he shortest way is to use the new "vector outline" option in the newer betas (layout -> vector -> vector outline).
Neue Testversion 18.90b9
-
- Mitglied
- Posts: 2162
- Joined: Sat 28 Sep 2013 01:25
Re: Neue Testversion 18.90b9
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
-
- Betatester
- Posts: 4056
- Joined: Sun 03 Jul 2005 13:35
- Location: Mülheim/Ruhr
Re: Neue Testversion 18.90b9
Wenn man die Hintergrundebene mit dem Lasso beschneidet, dann verliert die Vordergrundebene ihren Ebenenmodus und wird wieder normal.
You do not have the required permissions to view the files attached to this post.
----------------
Herr Doktor, ich bin mir ganz sicher, ich habe Atom! /Doctor, doctor, I'm sure, I've got atoms!
Herr Doktor, ich bin mir ganz sicher, ich habe Atom! /Doctor, doctor, I'm sure, I've got atoms!
-
- Mitglied
- Posts: 2261
- Joined: Sat 12 May 2012 21:38
Re: Neue Testversion 18.90b9
I have a request in regards to the channels pane. It would be very useful if we could paint directly in the channels with greyscale values, and apply filters directly on the channels themselves by selecting them.
I would expect that when I paint with black in the selected RED channel, that I would get pure red. But that is not what happens: instead of red, a light blue/cyan appears. When I paint with black in the green channel, I get a pink/magenta, and with black in the Blue channel a slight yellow.
Very odd behaviour indeed. When I switch the background to CMYK, I expect to be able to paint with greyscale values in the channels themselves, but that does not work at all, unfortunately. Nor for Lab mode. Just black appears in a layer when I try to paint with black in one of those channels.
Even stranger, when I turn on G and B, and draw with black, the result is RED??? That makes no sense to me.
Basically, I expect to be able to draw with black/a greyscale value to add information to a specific channels, and with white to remove it. Now that we have blend modes available to us while painting, it would open up new possibilities. But the current channel behaviour seems either broken, or very counter-intuitive.
I do not comprehend Photoline's logic in this regard.
Am I missing something here? I also tried to activate and turn off the channels in painting tools, but with the same result.
And of course, spot channel support would be appreciated as well
*edit* I figured it out: by combining the RGB channels in the drawing tools, such as R and B, you get GREEN. With B and G it becomes RED.
Perhaps it is just me, but it seems extremely awkward. Why not allow us to just use greyscale values to edit the channels information? That is the standard nowadays.
I would expect that when I paint with black in the selected RED channel, that I would get pure red. But that is not what happens: instead of red, a light blue/cyan appears. When I paint with black in the green channel, I get a pink/magenta, and with black in the Blue channel a slight yellow.
Very odd behaviour indeed. When I switch the background to CMYK, I expect to be able to paint with greyscale values in the channels themselves, but that does not work at all, unfortunately. Nor for Lab mode. Just black appears in a layer when I try to paint with black in one of those channels.
Even stranger, when I turn on G and B, and draw with black, the result is RED??? That makes no sense to me.
Basically, I expect to be able to draw with black/a greyscale value to add information to a specific channels, and with white to remove it. Now that we have blend modes available to us while painting, it would open up new possibilities. But the current channel behaviour seems either broken, or very counter-intuitive.
I do not comprehend Photoline's logic in this regard.
Am I missing something here? I also tried to activate and turn off the channels in painting tools, but with the same result.
And of course, spot channel support would be appreciated as well
*edit* I figured it out: by combining the RGB channels in the drawing tools, such as R and B, you get GREEN. With B and G it becomes RED.
Perhaps it is just me, but it seems extremely awkward. Why not allow us to just use greyscale values to edit the channels information? That is the standard nowadays.
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
-
- Entwickler
- Posts: 4206
- Joined: Tue 19 Nov 2002 15:49
Re: Neue Testversion 18.90b9
Ich werde das reparieren.Hoogo wrote:Wenn man die Hintergrundebene mit dem Lasso beschneidet, dann verliert die Vordergrundebene ihren Ebenenmodus und wird wieder normal.
Martin
-
- Mitglied
- Posts: 222
- Joined: Mon 01 Jul 2013 20:53
Re: Neue Testversion 18.90b9
Spot channels are already supported in the actual beta and they work great. Also the duplex mode can be realized. In contrast to PS or Corel, in PL these features are realized based on layers and not on channels. In Acrobat the spot channels built by PL are shown as expected. Give these new features a try and you will enjoy them.
With respect to your questions concerning channels. Also the channels should be manipulated based on layers. All options of PS are possible with PL. Working with layers also makes it possible to conduct image and channel arithmetic. Also the options of the blend modes subtract and add can be performed.
Josef
With respect to your questions concerning channels. Also the channels should be manipulated based on layers. All options of PS are possible with PL. Working with layers also makes it possible to conduct image and channel arithmetic. Also the options of the blend modes subtract and add can be performed.
Josef
-
- Entwickler
- Posts: 4206
- Joined: Tue 19 Nov 2002 15:49
Re: Neue Testversion 18.90b9
You can do that with most "conventional" filters.Herbert123 wrote:I have a request in regards to the channels pane. It would be very useful if we could paint directly in the channels with greyscale values, and apply filters directly on the channels themselves by selecting them.
Why do you expect that? Writing black to the red channel removes red from the image, and only green and blue remains.Herbert123 wrote:I would expect that when I paint with black in the selected RED channel, that I would get pure red.
That's not PhotoLine's logic. That's just the way editing a single channel affects the resulting image. I just tried my old PS and the result was the same.Herbert123 wrote:But that is not what happens: instead of red, a light blue/cyan appears. When I paint with black in the green channel, I get a pink/magenta, and with black in the Blue channel a slight yellow.
Very odd behaviour indeed. When I switch the background to CMYK, I expect to be able to paint with greyscale values in the channels themselves, but that does not work at all, unfortunately. Nor for Lab mode. Just black appears in a layer when I try to paint with black in one of those channels.
Even stranger, when I turn on G and B, and draw with black, the result is RED??? That makes no sense to me.
Basically, I expect to be able to draw with black/a greyscale value to add information to a specific channels, and with white to remove it. Now that we have blend modes available to us while painting, it would open up new possibilities. But the current channel behaviour seems either broken, or very counter-intuitive.
I do not comprehend Photoline's logic in this regard.
What is missing?Herbert123 wrote:And of course, spot channel support would be appreciated as well
Perhaps you should just try painting with white.Herbert123 wrote:*edit* I figured it out: by combining the RGB channels in the drawing tools, such as R and B, you get GREEN. With B and G it becomes RED.
Perhaps it is just me, but it seems extremely awkward.
That is exactly what's happening.Herbert123 wrote:Why not allow us to just use greyscale values to edit the channels information? That is the standard nowadays.
Martin
-
- Mitglied
- Posts: 2162
- Joined: Sat 28 Sep 2013 01:25
Req: Channels for the Brighter and Darker tools
While working on Experiment 03 (Removing Lens Flares) it occurred to me that having the same Channels options for the Brighter and Darker tools as in the Painting tool would be very helpful. By selectively darkening areas of flare in the individual channels, correcting lens flares should become much easier.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
-
- Betatester
- Posts: 4056
- Joined: Sun 03 Jul 2005 13:35
- Location: Mülheim/Ruhr
Re: Neue Testversion 18.90b9
Works totally fine for me. But look carefully, and you will see that light blue color beneath the red channel in the RED picture. The eye shows what channels are visible, the background tells what channels get changed.Herbert123 wrote:I have a request in regards to the channels pane. It would be very useful if we could paint directly in the channels with greyscale values, and apply filters directly on the channels themselves by selecting them.
*edit* I figured it out: by combining the RGB channels in the drawing tools, such as R and B, you get GREEN. With B and G it becomes RED.
Perhaps it is just me, but it seems extremely awkward. Why not allow us to just use greyscale values to edit the channels information? That is the standard nowadays.
And I totally agree that you get cyan if you paint black to red. That leaves green and blue, and these add to cyan.
Maybe you just confuse white and black here?
What is that?Herbert123 wrote:And of course, spot channel support would be appreciated as well
You do not have the required permissions to view the files attached to this post.
----------------
Herr Doktor, ich bin mir ganz sicher, ich habe Atom! /Doctor, doctor, I'm sure, I've got atoms!
Herr Doktor, ich bin mir ganz sicher, ich habe Atom! /Doctor, doctor, I'm sure, I've got atoms!
-
- Betatester
- Posts: 4056
- Joined: Sun 03 Jul 2005 13:35
- Location: Mülheim/Ruhr
Re: Req: Channels for the Brighter and Darker tools
I would not do that directly to the graphics.photoken wrote:While working on Experiment 03 (Removing Lens Flares) it occurred to me that having the same Channels options for the Brighter and Darker tools as in the Painting tool would be very helpful. By selectively darkening areas of flare in the individual channels, correcting lens flares should become much easier.
I would add a medium gray layer and set its layer mode to overlay.
Then you can paint with black, white, any tool and filter without destroying the original picture. It will take some attempts until you have a final version.
----------------
Herr Doktor, ich bin mir ganz sicher, ich habe Atom! /Doctor, doctor, I'm sure, I've got atoms!
Herr Doktor, ich bin mir ganz sicher, ich habe Atom! /Doctor, doctor, I'm sure, I've got atoms!
-
- Betatester
- Posts: 3675
- Joined: Thu 26 Nov 2009 22:59
Re: Neue Testversion 18.90b9
Works here, it seems. Choose white and switch on the R channel in the tool settings, and you'll get red (or add red, depending on the values of the other channels). Choose black, and you'll get less red.Herbert123 wrote:Perhaps it is just me, but it seems extremely awkward. Why not allow us to just use greyscale values to edit the channels information? That is the standard nowadays.
For me, the only question is whether selecting/deselecting a channel in the Channels panel should directly affect the setting in the layer tools. But this wouldn't work as expected when the document working space is different from the colour space of the layer, or if an adjustment layer is involved which doesn't work channel-wise.
Cheers
Burkhard.
-
- Mitglied
- Posts: 2261
- Joined: Sat 12 May 2012 21:38
Re: Neue Testversion 18.90b9
Guys, I humbly apologize. It's really late here in Vancouver, and for some reason or other my brain and logic were twisted and turned in confusion when I was working on a channel move, and I confused 3d texture theory with colour channel theory. My bad. Painting in channels works as expected.
Sorry Martin for the confusion.
As for spot channels: currently we can add a vector layer and define a spot colour for that layer. But as far as I am aware, there is no option to create a bitmap based layer that serves as such?
And we cannot create a hexachrome, or a duotone, or tritone. Or a 8 colour dark/light print. At least, I do not think we can? It is one last reason why I sometimes have to resort to Photoshop.
Sorry Martin for the confusion.
As for spot channels: currently we can add a vector layer and define a spot colour for that layer. But as far as I am aware, there is no option to create a bitmap based layer that serves as such?
And we cannot create a hexachrome, or a duotone, or tritone. Or a 8 colour dark/light print. At least, I do not think we can? It is one last reason why I sometimes have to resort to Photoshop.
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
-
- Betatester
- Posts: 4056
- Joined: Sun 03 Jul 2005 13:35
- Location: Mülheim/Ruhr
Re: Neue Testversion 18.90b9
Where can I find that spot color option?Herbert123 wrote:As for spot channels: currently we can add a vector layer and define a spot colour for that layer. But as far as I am aware, there is no option to create a bitmap based layer that serves as such?
What if you add a layer mask to the vector?
----------------
Herr Doktor, ich bin mir ganz sicher, ich habe Atom! /Doctor, doctor, I'm sure, I've got atoms!
Herr Doktor, ich bin mir ganz sicher, ich habe Atom! /Doctor, doctor, I'm sure, I've got atoms!
-
- Mitglied
- Posts: 2261
- Joined: Sat 12 May 2012 21:38
Re: Neue Testversion 18.90b9
Add a document colour, and check "Spot". Then create a vector layer, and apply the colour.Hoogo wrote:Where can I find that spot color option?Herbert123 wrote:As for spot channels: currently we can add a vector layer and define a spot colour for that layer. But as far as I am aware, there is no option to create a bitmap based layer that serves as such?
What if you add a layer mask to the vector?
And YES! you are right! Adding a layer mask allows us to use a bitmap to adjust the spot colour, and thereby have full control.
What's more, we can set the Overprint to "fill", and have that spot colour overprint, so varnishes and metallics should be possible now as well. I will export a pdf, and inspect the result.
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
-
- Betatester
- Posts: 4056
- Joined: Sun 03 Jul 2005 13:35
- Location: Mülheim/Ruhr
Re: Neue Testversion 18.90b9
Seems I really missed something hereHerbert123 wrote:Add a document colour, and check "Spot". Then create a vector layer, and apply the colour.
What is a document color?
----------------
Herr Doktor, ich bin mir ganz sicher, ich habe Atom! /Doctor, doctor, I'm sure, I've got atoms!
Herr Doktor, ich bin mir ganz sicher, ich habe Atom! /Doctor, doctor, I'm sure, I've got atoms!
-
- Entwickler
- Posts: 4206
- Joined: Tue 19 Nov 2002 15:49
Re: Neue Testversion 18.90b9
You will lose this spot color, if you are exporting as PDF/X1a or PDF/X3 because both cannot export transparency.Herbert123 wrote:Add a document colour, and check "Spot". Then create a vector layer, and apply the colour.
And YES! you are right! Adding a layer mask allows us to use a bitmap to adjust the spot colour, and thereby have full control.
What's more, we can set the Overprint to "fill", and have that spot colour overprint, so varnishes and metallics should be possible now as well. I will export a pdf, and inspect the result.
The intended way is using the layer attributes: If the active layer is a 8-bit gray image, you can assign a (spot) color to the image.
Martin