Hi,
When I want to project a placeholder on a bottle, transparency is turned off, so there is a white square.
This is not the case when I project a normal image.
Does anyone know a way to avoid this?
- Paul
Projection of placeholder
-
- Entwickler
- Beiträge: 4176
- Registriert: Di 19 Nov 2002 15:49
-
- Mitglied
- Beiträge: 235
- Registriert: Fr 19 Dez 2008 11:36
Re: Projection of placeholder
Effect filters->Projection.
I can send you a document and/or video if needed.
- Paul
I can send you a document and/or video if needed.
- Paul
-
- Mitglied
- Beiträge: 235
- Registriert: Fr 19 Dez 2008 11:36
Re: Projection of placeholder
When I use this function I can see the transparency box being switched off in the layer attributes.
I just noticed that transparency is switched off too when I use Effects>Special tools>Swirl.
- Paul
I just noticed that transparency is switched off too when I use Effects>Special tools>Swirl.
- Paul
-
- Entwickler
- Beiträge: 4176
- Registriert: Di 19 Nov 2002 15:49
Re: Projection of placeholder
So you are applying a Dynamic Filter.
I see no basic difference between using Projection with a placeholder and an image.
The two differences I do see are:
- After converting a background layer with transparency to a placeholder, the resulting document has a white background. The placeholder does have transparency, though.
- After applying Projection to the placeholder, both the original placeholder and the result of the dynamic filter are visible. After setting the mix mode of the Dynamic Filter to "Replace", the original layer will be gone.
If you see a different behaviour, a small sample document containing the placeholder and the Dynamic Filter would be helpful.
Martin
-
- Entwickler
- Beiträge: 4176
- Registriert: Di 19 Nov 2002 15:49
Re: Projection of placeholder
Did you inspect the placeholder or the Dynamic Filter? The Layer Attributes of the Dynamic Filter show the properties of the mask and the mask usually doesn't have transparency.
Martin