Seite 1 von 2
Neue Testversion 21.40b9
Verfasst: Mi 13 Feb 2019 06:46
von Gerhard Huber
Hallo,
es gibt wieder eine neue Testversion 21.40b9.
Windows:
http://www.pl32.com/beta/pl2140b9.zip
Mac OS:
http://www.pl32.com/beta/plx2140b9.zip
Neues:
- Mehr Einstellungen für die Panoramafunktion
- Gmic mit Unterstützung für die Paint.net Version
- Diverse Fehlerbehebungen und kleinere Verbesserungen
Re: Neue Testversion 21.40b9
Verfasst: Mi 13 Feb 2019 18:19
von Herbert123
G'MIC works fine now (at least, for Windows - not sure about Mac?)
For those who wish to test this:
- Visit
https://gmic.eu/download.shtml
- Click on the link for the Paint.NET version
https://forums.getpaint.net/topic/11356 ... 1-12-2019/
- download either the 64bit or 32bit version. I tested the 64bit version.
- Unzip to a folder. I extracted the content to a plugins folder of mine.
- Open PhotoLine, FILTER-->EXTERNAL PROGRAMS-->MANAGE EXTERNAL PROGRAMS
- Add a new entry, and point it to the gmic_paintdotnet_qt.exe file.. Pick PNG as intermediate file format
That is it! Explore 397 high-quality effects and filters, and have some fun!
Many thanks to the PhotoLine Devs!
Re: Neue Testversion 21.40b9
Verfasst: Mi 13 Feb 2019 18:42
von russellcottrell
Some documentation for OpenPano:
https://github.com/ppwwyyxx/OpenPano
Options:
Three modes are available:
cylinder mode. Give better results if:
You are only turning left (or right) when taking the images (as is usually done), no translations or other type of rotations allowed.
Images are taken with the same camera, with a known FOCAL_LENGTH set in config.
Images are given in the left-to-right order.
camera estimation mode. No translation is the only requirement on cameras. It can usually work well as long as you don't have too few images. But it's slower because it needs to perform pairwise matches.
translation mode. Simply stitch images together by affine transformation. It works when camera performs pure translation and scene points are roughly at the same depth. It also requires ordered input.
Some options you may care:
FOCAL_LENGTH: focal length of your camera in 35mm equivalent. Only useful in cylinder mode.
ORDERED_INPUT: whether input images are ordered sequentially. has to be 1 in CYLINDER and TRANS mode.
CROP: whether to crop the final image to avoid irregular white border.
In cylinder/translation mode, the input file names need to have the correct order.
PhotoLine crashes when trying to stitch a multi-row panorama using the ordered input option (Reihenfolge fest).
I could not figure out what Native means. It usually results in a “target size too large” error.
I was using images taken on a tripod with a panoramic head, but the stitcher still has a lot of trouble with moving foliage.
Re: Neue Testversion 21.40b9
Verfasst: Mi 13 Feb 2019 19:09
von Onkel Hatti
Gerhard Huber hat geschrieben: ↑Mi 13 Feb 2019 06:46
- Gmic mit Unterstützung für die Paint.net Version
That is soooo cool. Thanks a lot!
Hatti
Re: Neue Testversion 21.40b9
Verfasst: Mi 13 Feb 2019 19:21
von Herbert123
[edited - silly mistake on my part]
As for panoramas, it is a bit of a hit and miss affair. I have tested a number, but most just won't work. Only one (with RAW images) so far seems to work out of 6 tested, and the result looks acceptable - blurry, though.
Re: Neue Testversion 21.40b9
Verfasst: Do 14 Feb 2019 11:53
von Gerhard Huber
russellcottrell hat geschrieben:PhotoLine crashes when trying to stitch a multi-row panorama using the ordered input option (Reihenfolge fest).
do you have example images for this?
russellcottrell hat geschrieben:I could not figure out what Native means. It usually results in a “target size too large” error.
I tested with the sample pictures of OpenPano. There is no problem in "Native mode". The 3 listed modes are flags to set before I call Open Pano. I somewhere read that I can call it without setting one of the flags - that's native.
russellcottrell hat geschrieben:I was using images taken on a tripod with a panoramic head, but the stitcher still has a lot of trouble with moving foliage.
I don't know what I should think of OpenPano. It's fast and the results are good if there are results
But it has no "remove not good images" function, so it will stop working if one of the images is not stitchable.
Re: Neue Testversion 21.40b9
Verfasst: Do 14 Feb 2019 18:52
von russellcottrell
Re: Neue Testversion 21.40b9
Verfasst: Fr 15 Feb 2019 20:24
von maxwell
in Beta 9 funktioniert die Panorama Version mit jpg, bei Olympus Raw Dateien stürzt Photoline weiterhin ab. Das resultierende Panorama mit jpg's ist gut. Test wurde unter Windows 10 64 Bit auf zwei Rechnern mit denselben Bildern durchgeführt.
Grüße
Josef
Re: Neue Testversion 21.40b9
Verfasst: Sa 23 Feb 2019 12:42
von Frank10823
Hallo,
das Löschen von Plugin-Pfaden funktioniert nicht. Ich habe die Nik-Software als Plugin angelegt und kann den Pfand nicht mehr löschen.
Ich nutze Windows 10 64 bit.
Re: Neue Testversion 21.40b9
Verfasst: Sa 23 Feb 2019 14:10
von Gerhard Huber
Frank10823 hat geschrieben: ↑Sa 23 Feb 2019 12:42das Löschen von Plugin-Pfaden funktioniert nicht. Ich habe die Nik-Software als Plugin angelegt und kann den Pfand nicht mehr löschen.
Ich nutze Windows 10 64 bit.
Das kann ich hier nicht nachvollziehen.
Re: Neue Testversion 21.40b9
Verfasst: Sa 23 Feb 2019 16:31
von Frank10823
Gerhard Huber hat geschrieben: ↑Sa 23 Feb 2019 14:10
Frank10823 hat geschrieben: ↑Sa 23 Feb 2019 12:42das Löschen von Plugin-Pfaden funktioniert nicht. Ich habe die Nik-Software als Plugin angelegt und kann den Pfand nicht mehr löschen.
Ich nutze Windows 10 64 bit.
Das kann ich hier nicht nachvollziehen.
gerade Testversion als Portable nochmals neu aufgesetzt. Bei mir ist der Fehler vorhanden.
Es waren keine weiteren Veränderungen nur das Plugin.
Falls ich weiter helfen kann bitte um Informationen
Re: Neue Testversion 21.40b9
Verfasst: Sa 23 Feb 2019 18:07
von Gerhard Huber
sieht so aus, als ob es Probleme gäbe, den letzten bzw. einzigen Eintrag zu löschen. Ich sehe mir das an.
Re: Neue Testversion 21.40b9
Verfasst: Di 26 Feb 2019 00:43
von Herbert123
Small bug line tool with locked layer for editing:
1) create a new file
2) turn on Align to Auto Guides
3) draw a vector rectangle from corner to corner
4) lock this vector layer: position, selecting, protect content.
5) switch to the line tool
6) draw a line from corner to corner ---> this doesn't work
Step (6) will not work, because the line tool still selects the corner point from the locked vector layer, and moves that corner point instead.
Expected result: it should be possible to snap to the corners and draw a line from corner to corner without affecting the underlying locked vector layer.
Re: Neue Testversion 21.40b9
Verfasst: Mi 27 Feb 2019 10:29
von Martin Huber
Herbert123 hat geschrieben: ↑Di 26 Feb 2019 00:43
Small bug line tool with locked layer for editing:
I will fix that.
Martin
Re: Neue Testversion 21.40b9
Verfasst: Do 03 Okt 2019 19:18
von NoSi
Herbert123 hat geschrieben: ↑Mi 13 Feb 2019 18:19
G'MIC works fine now (at least, for Windows - not sure about Mac?)
For those who wish to test this:
[…]
That is it! Explore 397 high-quality effects and filters, and have some fun!
Did this exactly in a portable installation Win10x64. Does not do anything. I am asked for the transfer mode (original, all layers rendered, layer) but regardless to my selection, it returnes to Photoline. No Dialog is opened.
Is possibly a special Dot-Net package required?