Neue Testversion 21.40b9

Hier diskutieren die Betatester von PhotoLine untereinander und mit den Entwicklern
User avatar
Gerhard Huber
Entwickler
Entwickler
Posts: 3610
Joined: Mon 18 Nov 2002 15:30
Location: Bad Gögging

Neue Testversion 21.40b9

Post by Gerhard Huber » Wed 13 Feb 2019 06:46

Hallo,

es gibt wieder eine neue Testversion 21.40b9.

Windows:
http://www.pl32.com/beta/pl2140b9.zip

Mac OS:
http://www.pl32.com/beta/plx2140b9.zip


Neues:
  • Mehr Einstellungen für die Panoramafunktion
  • Gmic mit Unterstützung für die Paint.net Version
  • Diverse Fehlerbehebungen und kleinere Verbesserungen

User avatar
Herbert123
Mitglied
Posts: 1769
Joined: Sat 12 May 2012 21:38

Re: Neue Testversion 21.40b9

Post by Herbert123 » Wed 13 Feb 2019 18:19

G'MIC works fine now (at least, for Windows - not sure about Mac?)

For those who wish to test this:
- Visit https://gmic.eu/download.shtml
- Click on the link for the Paint.NET version https://forums.getpaint.net/topic/11356 ... 1-12-2019/
- download either the 64bit or 32bit version. I tested the 64bit version.
- Unzip to a folder. I extracted the content to a plugins folder of mine.
- Open PhotoLine, FILTER-->EXTERNAL PROGRAMS-->MANAGE EXTERNAL PROGRAMS
- Add a new entry, and point it to the gmic_paintdotnet_qt.exe file.. Pick PNG as intermediate file format

That is it! Explore 397 high-quality effects and filters, and have some fun!

Many thanks to the PhotoLine Devs!
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait

User avatar
russellcottrell
Mitglied
Posts: 131
Joined: Sat 26 Jul 2014 10:13

Re: Neue Testversion 21.40b9

Post by russellcottrell » Wed 13 Feb 2019 18:42

Some documentation for OpenPano: https://github.com/ppwwyyxx/OpenPano
Options:

Three modes are available:

cylinder mode. Give better results if:
You are only turning left (or right) when taking the images (as is usually done), no translations or other type of rotations allowed.
Images are taken with the same camera, with a known FOCAL_LENGTH set in config.
Images are given in the left-to-right order.

camera estimation mode. No translation is the only requirement on cameras. It can usually work well as long as you don't have too few images. But it's slower because it needs to perform pairwise matches.

translation mode. Simply stitch images together by affine transformation. It works when camera performs pure translation and scene points are roughly at the same depth. It also requires ordered input.

Some options you may care:

FOCAL_LENGTH: focal length of your camera in 35mm equivalent. Only useful in cylinder mode.
ORDERED_INPUT: whether input images are ordered sequentially. has to be 1 in CYLINDER and TRANS mode.
CROP: whether to crop the final image to avoid irregular white border.

In cylinder/translation mode, the input file names need to have the correct order.
PhotoLine crashes when trying to stitch a multi-row panorama using the ordered input option (Reihenfolge fest).

I could not figure out what Native means. It usually results in a “target size too large” error.

I was using images taken on a tripod with a panoramic head, but the stitcher still has a lot of trouble with moving foliage.

Onkel Hatti
Mitglied
Posts: 20
Joined: Fri 12 Sep 2014 16:58

Re: Neue Testversion 21.40b9

Post by Onkel Hatti » Wed 13 Feb 2019 19:09

Gerhard Huber wrote:
Wed 13 Feb 2019 06:46
  • Gmic mit Unterstützung für die Paint.net Version
That is soooo cool. Thanks a lot!

Hatti

User avatar
Herbert123
Mitglied
Posts: 1769
Joined: Sat 12 May 2012 21:38

Re: Neue Testversion 21.40b9

Post by Herbert123 » Wed 13 Feb 2019 19:21

[edited - silly mistake on my part]

As for panoramas, it is a bit of a hit and miss affair. I have tested a number, but most just won't work. Only one (with RAW images) so far seems to work out of 6 tested, and the result looks acceptable - blurry, though.
Last edited by Herbert123 on Thu 14 Feb 2019 20:21, edited 1 time in total.
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait

User avatar
Gerhard Huber
Entwickler
Entwickler
Posts: 3610
Joined: Mon 18 Nov 2002 15:30
Location: Bad Gögging

Re: Neue Testversion 21.40b9

Post by Gerhard Huber » Thu 14 Feb 2019 11:53

russellcottrell wrote:PhotoLine crashes when trying to stitch a multi-row panorama using the ordered input option (Reihenfolge fest).
do you have example images for this?
russellcottrell wrote:I could not figure out what Native means. It usually results in a “target size too large” error.
I tested with the sample pictures of OpenPano. There is no problem in "Native mode". The 3 listed modes are flags to set before I call Open Pano. I somewhere read that I can call it without setting one of the flags - that's native.
russellcottrell wrote:I was using images taken on a tripod with a panoramic head, but the stitcher still has a lot of trouble with moving foliage.
I don't know what I should think of OpenPano. It's fast and the results are good if there are results :-)
But it has no "remove not good images" function, so it will stop working if one of the images is not stitchable.

User avatar
russellcottrell
Mitglied
Posts: 131
Joined: Sat 26 Jul 2014 10:13

Re: Neue Testversion 21.40b9

Post by russellcottrell » Thu 14 Feb 2019 18:52


maxwell
Mitglied
Posts: 170
Joined: Mon 01 Jul 2013 20:53

Re: Neue Testversion 21.40b9

Post by maxwell » Fri 15 Feb 2019 20:24

in Beta 9 funktioniert die Panorama Version mit jpg, bei Olympus Raw Dateien stürzt Photoline weiterhin ab. Das resultierende Panorama mit jpg's ist gut. Test wurde unter Windows 10 64 Bit auf zwei Rechnern mit denselben Bildern durchgeführt.

Grüße

Josef

Frank10823
Mitglied
Posts: 122
Joined: Wed 30 Apr 2014 08:54
Location: Düsseldorf

Re: Neue Testversion 21.40b9

Post by Frank10823 » Sat 23 Feb 2019 12:42

Hallo,

das Löschen von Plugin-Pfaden funktioniert nicht. Ich habe die Nik-Software als Plugin angelegt und kann den Pfand nicht mehr löschen.
Ich nutze Windows 10 64 bit.
Frank

User avatar
Gerhard Huber
Entwickler
Entwickler
Posts: 3610
Joined: Mon 18 Nov 2002 15:30
Location: Bad Gögging

Re: Neue Testversion 21.40b9

Post by Gerhard Huber » Sat 23 Feb 2019 14:10

Frank10823 wrote:
Sat 23 Feb 2019 12:42
das Löschen von Plugin-Pfaden funktioniert nicht. Ich habe die Nik-Software als Plugin angelegt und kann den Pfand nicht mehr löschen.
Ich nutze Windows 10 64 bit.
Das kann ich hier nicht nachvollziehen.

Frank10823
Mitglied
Posts: 122
Joined: Wed 30 Apr 2014 08:54
Location: Düsseldorf

Re: Neue Testversion 21.40b9

Post by Frank10823 » Sat 23 Feb 2019 16:31

Gerhard Huber wrote:
Sat 23 Feb 2019 14:10
Frank10823 wrote:
Sat 23 Feb 2019 12:42
das Löschen von Plugin-Pfaden funktioniert nicht. Ich habe die Nik-Software als Plugin angelegt und kann den Pfand nicht mehr löschen.
Ich nutze Windows 10 64 bit.
Das kann ich hier nicht nachvollziehen.
gerade Testversion als Portable nochmals neu aufgesetzt. Bei mir ist der Fehler vorhanden.
Es waren keine weiteren Veränderungen nur das Plugin.
Falls ich weiter helfen kann bitte um Informationen
Frank

User avatar
Gerhard Huber
Entwickler
Entwickler
Posts: 3610
Joined: Mon 18 Nov 2002 15:30
Location: Bad Gögging

Re: Neue Testversion 21.40b9

Post by Gerhard Huber » Sat 23 Feb 2019 18:07

sieht so aus, als ob es Probleme gäbe, den letzten bzw. einzigen Eintrag zu löschen. Ich sehe mir das an.

User avatar
Herbert123
Mitglied
Posts: 1769
Joined: Sat 12 May 2012 21:38

Re: Neue Testversion 21.40b9

Post by Herbert123 » Tue 26 Feb 2019 00:43

Small bug line tool with locked layer for editing:

1) create a new file
2) turn on Align to Auto Guides
3) draw a vector rectangle from corner to corner
4) lock this vector layer: position, selecting, protect content.
5) switch to the line tool
6) draw a line from corner to corner ---> this doesn't work

Step (6) will not work, because the line tool still selects the corner point from the locked vector layer, and moves that corner point instead.

Expected result: it should be possible to snap to the corners and draw a line from corner to corner without affecting the underlying locked vector layer.
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait

Martin Huber
Entwickler
Entwickler
Posts: 3414
Joined: Tue 19 Nov 2002 15:49

Re: Neue Testversion 21.40b9

Post by Martin Huber » Wed 27 Feb 2019 10:29

Herbert123 wrote:
Tue 26 Feb 2019 00:43
Small bug line tool with locked layer for editing:
I will fix that.

Martin