Apply Image

Hier diskutieren die Anwender von PhotoLine untereinander
lacogada
Mitglied
Beiträge: 50
Registriert: Di 18 Aug 2020 03:07

Apply Image

Beitrag von lacogada »

Does PL have something similar to Photoshops "Apply Image" command ?
Benutzeravatar
der_fotograf
Mitglied
Beiträge: 559
Registriert: Mo 05 Dez 2016 08:33

Re: Apply Image

Beitrag von der_fotograf »

Would be great if you could describe what you mean. Most of us don't use PS for obvious reasons.
Nur wenige wissen, wie viel man wissen muss, um zu wissen, wie wenig man weiss.
Only few know how much you have to know to know how little you know.
— Werner Heisenberg [German theoretical physicist]
PhilM
Mitglied
Beiträge: 171
Registriert: Do 28 Mai 2015 18:00
Wohnort: Belgium

Re: Apply Image

Beitrag von PhilM »

Google for it ...

Most known usage is for frequency separation for portrait retouching.

Phil
lacogada
Mitglied
Beiträge: 50
Registriert: Di 18 Aug 2020 03:07

Re: Apply Image

Beitrag von lacogada »

Thanks for the replies.

Apply image is used for frequency separation but has many other uses.

Example : I wanted to darken sky in original image below.

Looked at the Red, Green, and Blue channels.
Noticed the red channel had the darkest sky.

Apllied red channel to a new layer.
Set blend mode to luminosity and sky darkens.

Used blending options to adjust effect for sky ( does PL have blending options )

No need to make a mask or selection.

PS: Cannot get my images to show .... sized to 600 pixels long side.
Benutzeravatar
russellcottrell
Mitglied
Beiträge: 251
Registriert: Sa 26 Jul 2014 10:13
Wohnort: California

Re: Apply Image

Beitrag von russellcottrell »

The blend mode is at the top of the Layers panel (default is Normal).
One way to do what you are doing is to create a Gray Mixer adjustment layer. Set the blend mode to Luminance, then darken Cyan and Blue.
Another is to use curves with a Color Filter to limit the hues to cyan and blue.
lacogada
Mitglied
Beiträge: 50
Registriert: Di 18 Aug 2020 03:07

Re: Apply Image

Beitrag von lacogada »

russellcottrell hat geschrieben: So 20 Sep 2020 16:06 The blend mode is at the top of the Layers panel (default is Normal).
One way to do what you are doing is to create a Gray Mixer adjustment layer. Set the blend mode to Luminance, then darken Cyan and Blue.
Another is to use curves with a Color Filter to limit the hues to cyan and blue.
Thanks Russell

Does PL have something similar to PS "blending options" ?
Benutzeravatar
russellcottrell
Mitglied
Beiträge: 251
Registriert: Sa 26 Jul 2014 10:13
Wohnort: California

Re: Apply Image

Beitrag von russellcottrell »

That would be Color Filter; right-click a layer and select Color Filter. I don't think that other program has an HIS or HSV option; blending based on hue is extremely useful.
lacogada
Mitglied
Beiträge: 50
Registriert: Di 18 Aug 2020 03:07

Re: Apply Image

Beitrag von lacogada »

russellcottrell hat geschrieben: Mo 21 Sep 2020 17:41 That would be Color Filter; right-click a layer and select Color Filter. I don't think that other program has an HIS or HSV option; blending based on hue is extremely useful.
Thank you !