How to go from fixed text box to expandable.
-
- Mitglied
- Beiträge: 131
- Registriert: Do 11 Sep 2008 21:03
- Wohnort: Tolmezzo (UD) Italia
How to go from fixed text box to expandable.
It's more a curiosity then a problem, but I'd like to understand how (and if) I can revert a fixed size text box to a expandable text (without ruler above), like I get when I start to write e new text?
-
- Mitglied
- Beiträge: 1497
- Registriert: Mo 23 Dez 2019 15:21
- Wohnort: Ukraine
Re: How to go from fixed text box to expandable.
Text tool transform behave rather unusual compare to other objects. Some logic and improvement ideas where described here https://www.pl32.com/forum3/viewtopic.p ... =15#p47735
And as i remember the answer from developer was that normally it is impossible anytime switch back from fixed size text box to a expandable text (without ruler above).
But if by accident you touch text transform handles without Command key modifier and change mode, it can be switched back to normal mode by Command+Z. This works only starting from 22.40b14 and v22.5
And as i remember the answer from developer was that normally it is impossible anytime switch back from fixed size text box to a expandable text (without ruler above).
But if by accident you touch text transform handles without Command key modifier and change mode, it can be switched back to normal mode by Command+Z. This works only starting from 22.40b14 and v22.5
PhotoLine UI Icons Customization Project: https://www.pl32.com/forum3/viewtopic.php?f=3&t=6302
-
- Mitglied
- Beiträge: 131
- Registriert: Do 11 Sep 2008 21:03
- Wohnort: Tolmezzo (UD) Italia
Re: How to go from fixed text box to expandable.
It seems a bit strange to me that we cannot re-convert a text, perhaps because I use other software (CADs) that handles texts in a similar way, but allows conversion in both directions.
In any case, thanks for your advice, so I don't waste other time to try to do something impossible.
-
- Betatester
- Beiträge: 745
- Registriert: Di 19 Nov 2002 17:22
- Wohnort: Entenhausen
Re: How to go from fixed text box to expandable.
1. You have text in textbox A
2. Copy the text into the clipboard
3. Create textbox B (the other type )
4. Paste the text into B
5. Delete textbox A
2. Copy the text into the clipboard
3. Create textbox B (the other type )
4. Paste the text into B
5. Delete textbox A
-
- Mitglied
- Beiträge: 131
- Registriert: Do 11 Sep 2008 21:03
- Wohnort: Tolmezzo (UD) Italia
-
- Mitglied
- Beiträge: 1497
- Registriert: Mo 23 Dez 2019 15:21
- Wohnort: Ukraine
Re: How to go from fixed text box to expandable.
As described earlier, the core of this problem is that Text Tool transform by default use DTP mode (frame with ruler) and unfortunately there are no any user controlled toggles for these defaults directly in Text Tool.
Let's hope that Text Tool will be improved somewhere in future.
Until that Undo or Copy/Paste text to new text layer are the only ways to fix this problem.
Also don't forget to press Command+Shift if you want to transform Text in same way as any other normal object and also keep proportions. And yes, it is cumbersome and confusing.
Let's hope that Text Tool will be improved somewhere in future.
Until that Undo or Copy/Paste text to new text layer are the only ways to fix this problem.
Also don't forget to press Command+Shift if you want to transform Text in same way as any other normal object and also keep proportions. And yes, it is cumbersome and confusing.
PhotoLine UI Icons Customization Project: https://www.pl32.com/forum3/viewtopic.php?f=3&t=6302
-
- Betatester
- Beiträge: 3674
- Registriert: Do 26 Nov 2009 22:59
Re: How to go from fixed text box to expandable.
With previous versions, you could use “Optimise Layer Size” to get back to expanding text boxes. Not sure if this feature disappeared on purpose.
Cheers
Burkhard
Cheers
Burkhard
-
- Mitglied
- Beiträge: 131
- Registriert: Do 11 Sep 2008 21:03
- Wohnort: Tolmezzo (UD) Italia
-
- Mitglied
- Beiträge: 1497
- Registriert: Mo 23 Dez 2019 15:21
- Wohnort: Ukraine
Re: How to go from fixed text box to expandable.
Seems problem fixed in 22.90b4
Textebenen können wieder auf "dynamisch" zurückgeschaltet werden, in den Werkzeugeinstellungen, letzter Reiter
Text layers can be switched back to "dynamic" in the tool settings, last tab
Textebenen können wieder auf "dynamisch" zurückgeschaltet werden, in den Werkzeugeinstellungen, letzter Reiter
Text layers can be switched back to "dynamic" in the tool settings, last tab
PhotoLine UI Icons Customization Project: https://www.pl32.com/forum3/viewtopic.php?f=3&t=6302
-
- Mitglied
- Beiträge: 131
- Registriert: Do 11 Sep 2008 21:03
- Wohnort: Tolmezzo (UD) Italia