Hi.
I need to print color targets from the PL with color management turned off.
Or an image converted from the outside with the Argyll CMS into the desired printer profile.
When I turn off the ColorManagement in the PL on the ColorManagement-> Devices-> Activate Color Management tab,
then PL uses the profile specified in the ColorManagement-> Standard-> RGB tab when printing.
This is wrong, because When the ColorManagement is disabled, RGB values must be printed directly,
bypassing the conversion to LAB.
I would like to make such a print from PL, so as not to use third-party programs.
This problem, it seems to me, has in common with what I described earlier:
http://www.pl32.com/forum3/viewtopic.php?f=3&t=5934
Printing from PL with the switched off colormanagement
-
- Mitglied
- Beiträge: 84
- Registriert: Di 23 Jan 2018 10:06
- Wohnort: Russia
-
- Entwickler
- Beiträge: 4159
- Registriert: Di 19 Nov 2002 15:49
Re: Printing from PL with the switched off colormanagement
I will check that.
Martin
Martin
-
- Mitglied
- Beiträge: 84
- Registriert: Di 23 Jan 2018 10:06
- Wohnort: Russia
Re: Printing from PL with the switched off colormanagement
Thanks for fixing in version 21.