Neue Testversion 19.90b2

Hier diskutieren die Betatester von PhotoLine untereinander und mit den Entwicklern
User avatar
Gerhard Huber
Entwickler
Entwickler
Posts: 3990
Joined: Mon 18 Nov 2002 15:30
Location: Bad Gögging

Neue Testversion 19.90b2

Post by Gerhard Huber »

Hallo,

es gibt wieder eine neue Testversion 19.90b2.

Windows:
http://www.pl32.com/beta/pl1990b2.zip


Mac OS:
http://www.pl32.com/beta/plx1990b2.zip



Neues:
  • neuer Filter "Kontext Weich"
  • diverse Kleinigkeiten
User avatar
photoken
Mitglied
Posts: 2162
Joined: Sat 28 Sep 2013 01:25

Context Blur filter

Post by photoken »

The new Context Blur filter is very intriguing.

For example, given this original:
Jen original.jpg
Applying the Context Blur filter and then a High Pass filter (in "Vivid Light" blending mode) gives an interesting painterly effect:
Jen context blur & HP.jpg
You do not have the required permissions to view the files attached to this post.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
User avatar
photoken
Mitglied
Posts: 2162
Joined: Sat 28 Sep 2013 01:25

Problems fixed, thanks!

Post by photoken »

The File Open dialog's file type list is now correctly sized:
http://www.pl32.com/forum3/viewtopic.ph ... %3A#p39239

Thanks again.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
User avatar
photoken
Mitglied
Posts: 2162
Joined: Sat 28 Sep 2013 01:25

Re: Context Blur filter

Post by photoken »

This is really great with scenic images that have a lot of detail:
scenic original.jpg
scenic context blur.jpg
This filter works much better that that "gimmick" Dream Thing filter in Krita -- the PL filter does a much better job of following the contours of the original image, and it's a thousand times faster. :)
You do not have the required permissions to view the files attached to this post.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
User avatar
photoken
Mitglied
Posts: 2162
Joined: Sat 28 Sep 2013 01:25

Fixed: Context Blur "After" preview

Post by photoken »

Win7 Pro x64 SP1
PL 19.90b2 x64

The dialog for the Context Blur filter distorts the colours in the "After" panel:
context blur dialog.jpg
Also, it would help to have a progress bar for the filter, either in the dialog box itself or in the main Status Bar -- the filter does take a significant amount of time to process the entire image, and often the changes are so subtle that it is difficult to see the progress in the image itself.
You do not have the required permissions to view the files attached to this post.
Last edited by photoken on Wed 14 Sep 2016 09:04, edited 1 time in total.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
User avatar
photoken
Mitglied
Posts: 2162
Joined: Sat 28 Sep 2013 01:25

English translation needed: New Document dialog

Post by photoken »

new doc dialog.png
You do not have the required permissions to view the files attached to this post.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
User avatar
Herbert123
Mitglied
Posts: 2009
Joined: Sat 12 May 2012 21:38

Re: Neue Testversion 19.90b2

Post by Herbert123 »

Thanks for the new beta!

I noticed we now have an option to paint with colour depending on the pen pressure? It would be great if all of these options (intensity, brush size, and colour) could be combined in any way we want. In place of a static drop-down menu, perhaps use the same system as the channels? Or check boxes?

And the "paint only once" and "connect brush positions" ought to become part of the brush settings as well. It takes too much time to open the options, and change these two settings.
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
User avatar
Herbert123
Mitglied
Posts: 2009
Joined: Sat 12 May 2012 21:38

Re: Neue Testversion 19.90b2

Post by Herbert123 »

A small request. When we scale a bitmap layer in the view, and fix it, we cannot decide which sampling algorithm is used. Would it be possible to amend the Working-->Special options with an option "default (sampling) interpolation" which controls which general interpolation method is used when rotating, scaling, etc. and fixing the changes (when exporting, etc as well).

That would save a lot of work.
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
User avatar
Hoogo
Betatester
Posts: 3890
Joined: Sun 03 Jul 2005 13:35
Location: Mülheim/Ruhr

Re: Neue Testversion 19.90b2

Post by Hoogo »

Herbert123 wrote:Would it be possible to amend the Working-->Special options with an option "default (sampling) interpolation" which controls which general interpolation method is used...
I'd prefer that in the usual layer properties. Nut sore if this could even fit into the already available antaliasing options.
----------------
Herr Doktor, ich bin mir ganz sicher, ich habe Atom! /Doctor, doctor, I'm sure, I've got atoms!
Frank10823
Mitglied
Posts: 128
Joined: Wed 30 Apr 2014 08:54

Re: Neue Testversion 19.90b2

Post by Frank10823 »

Hallo,

beim neuen Filter: Kontext-Weich stimmt in der Vorschau die Farbe nicht bei Orange.

Viele Grüße

Frank
Frank
User avatar
Herbert123
Mitglied
Posts: 2009
Joined: Sat 12 May 2012 21:38

Re: Neue Testversion 19.90b2

Post by Herbert123 »

Hoogo wrote:
Herbert123 wrote:Would it be possible to amend the Working-->Special options with an option "default (sampling) interpolation" which controls which general interpolation method is used...
I'd prefer that in the usual layer properties. Nut sore if this could even fit into the already available antaliasing options.
Me too, but I have requested this before, and at the time Martin seemed to be hesitant about adding this. I think this is an important option to have - no matter if it is added to the preferences or to the layer properties.
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
User avatar
photoken
Mitglied
Posts: 2162
Joined: Sat 28 Sep 2013 01:25

Fixed: Vector group lines disappear when rotated 180 deg.

Post by photoken »

Win7 Pro x64 SP1
PL 19.90b2 x64

When a group containing vector lines is rotated +180 deg. (or -180 deg.), the lines either "disappear" or become very thin:
group original.png
group rotated.png
Steps to reproduce:
  1. Create a black line.
  2. Duplicate the line.
  3. Change the colour of the duplicated line to white.
  4. Reduce the size of that white line.
  5. Duplicate the white line.
  6. Use Layer...Rotate Layer to rotate the duplicated white line 90 deg.
  7. Group the two white line layers.
  8. Use Layer...Rotate Layer to rotate that group either +180 deg. or -180 deg.
Result:
The lines in the rotated group become very thin or disappear entirely.

Expected result:
The lines should retain their width and visibility.

Sample PLD file:
group rotation.zip
You do not have the required permissions to view the files attached to this post.
Last edited by photoken on Wed 14 Sep 2016 08:53, edited 1 time in total.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
bkh
Betatester
Posts: 3661
Joined: Thu 26 Nov 2009 22:59

Re: Neue Testversion 19.90b2

Post by bkh »

Bei der kleinsten Icon-Größe im Finder (16 x 16 Pixel, kleinste Icon-Größe und kleine Icons in der Listen-Ansicht) werden im Moment keine Custom Icons für die PLD-Dateien angezeigt. Sobald die Icons etwas größer werden, scheint alles ok zu sein.

Ich habe auch immer wieder die folgenden Einträge im Systemlog, z. B. wenn ich den Speichern-Dialog öffne und dort eine Liste von PLD-Dateien angezeigt wird.

Code: Select all

05/05/16 22:34:38,734 iconservicesagent[17344]: -[ISGenerateImageOp generateImageWithCompletion:] Failed to composit image for descriptor <ISBindingImageDescriptor: 0x7f9872427890>.
05/05/16 22:34:38,735 quicklookd[18550]: Error returned from iconservicesagent: (null)
Ach ja, und wo ich es gerade sehe: wenn beim Speichern-Dialog ein Alias im angezeigten Ordner ist, sehe ich im System-Log solche Einträge:

Code: Select all

05/05/16 22:42:34,829 PhotoLine[7055]: /Users/Burkhard/Desktop/Backup Fotos: The file doesn’t exist.
L.G.

Burkhard.
Martin Huber
Entwickler
Entwickler
Posts: 3942
Joined: Tue 19 Nov 2002 15:49

Re: Prob: Context Blur "After" preview

Post by Martin Huber »

photoken wrote:Win7 Pro x64 SP1
PL 19.90b2 x64

The dialog for the Context Blur filter distorts the colours in the "After" panel:
und/and
Frank10823 wrote:beim neuen Filter: Kontext-Weich stimmt in der Vorschau die Farbe nicht bei Orange.
This seems to be a problem on Windows. We will check that.

Das scheint ein Windows-Problem zu sein. Wir werden das prüfen.

Martin
Martin Huber
Entwickler
Entwickler
Posts: 3942
Joined: Tue 19 Nov 2002 15:49

Re: Prob: Context Blur "After" preview

Post by Martin Huber »

photoken wrote:Also, it would help to have a progress bar for the filter,
there will be one in the next version.

Martin