Neue Testversion 18.90b1
-
- Entwickler
- Beiträge: 4144
- Registriert: Mo 18 Nov 2002 15:30
- Wohnort: Bad Gögging
Neue Testversion 18.90b1
Hallo,
es gibt wieder eine neue Testversion 18.90b1.
Windows:
www.pl32.com/beta/pl1890b1.zip
Mac OS X:
www.pl32.com/beta/plx1890b1.zip
Neues:
- gleicher Stand, wie 18.52
- Vom Scanner oder der Kamera: Kann jetzt vom Scanner Mehrseitendokumente erzeugen
- Aktionen: Manuelles Speichern speichert nun auch Gruppen
- Beschnittbreite: Funktion jetzt als Aktion aufzeichenbar
- Ebenenattribute, Drehung: Jetzt mit Kontextmenü "Rücksetzen"
Gerhard Huber [Computerinsel GmbH]
support@pl32.de - www.pl32.de
es gibt wieder eine neue Testversion 18.90b1.
Windows:
www.pl32.com/beta/pl1890b1.zip
Mac OS X:
www.pl32.com/beta/plx1890b1.zip
Neues:
- gleicher Stand, wie 18.52
- Vom Scanner oder der Kamera: Kann jetzt vom Scanner Mehrseitendokumente erzeugen
- Aktionen: Manuelles Speichern speichert nun auch Gruppen
- Beschnittbreite: Funktion jetzt als Aktion aufzeichenbar
- Ebenenattribute, Drehung: Jetzt mit Kontextmenü "Rücksetzen"
Gerhard Huber [Computerinsel GmbH]
support@pl32.de - www.pl32.de
-
- Mitglied
- Beiträge: 2162
- Registriert: Sa 28 Sep 2013 01:25
Req: Color to Transparency as layer "mask"
When the Color to Transparency function is applied, specifying "Create Adjustment Layer", the adjustment layer is created above the image layer. If the image layer does not have a transparent layer beneath it, the effect is not what is expected:
Instead, if the Color to Transparency adjustment layer were created as a "mask" layer for the image layer, the result would be as expected:
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
-
- Mitglied
- Beiträge: 2162
- Registriert: Sa 28 Sep 2013 01:25
Re: Req: Color to Transparency as layer "mask"
The difference is even more pronounced when a layer containing information is below the original image. Here's the effect of the current behavior of the Color to Transparency adjustment layer:
Here's the effect of the proposed request:
I'd argue that the requested adjustment layer placement as a "mask" gives the effect that is most expected.Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
-
- Betatester
- Beiträge: 3674
- Registriert: Do 26 Nov 2009 22:59
Re: Req: Color to Transparency as layer "mask"
If you have created the previous adjustment layer as a child layer (via the chain symbol), the next one will be a child layer by default, if it was an ordinary adjustment layer, the next one will be ordinary as well.photoken hat geschrieben:When the Color to Transparency function is applied, specifying "Create Adjustment Layer", the adjustment layer is created above the image layer.
Indeed. I would have expected it to create transparency in the final image (regardless of whether the final image had transparency before – just like Colour Filter and Clipping Layers). Remember, an adjustment layer on the layer stack is supposed to work on the combined image below it, not just on the image layer below it. If you want to apply it to a single layer, just use it as a child layer (or create an isolated group).photoken hat geschrieben:If the image layer does not have a transparent layer beneath it, the effect is not what is expected:
Cheers
Burkhard.
-
- Betatester
- Beiträge: 3674
- Registriert: Do 26 Nov 2009 22:59
Re: Neue Testversion 18.90b1
There's another small bug in "Color to Transparency", namely in the Colour Picker:
If I open the panel with the preview section open, then the Colour Picker icon is highlighted, but it isn't active (and the highlighting disappears if I move the cursor on the icon).
EDIT: just noticed that this also happens in the Curves panel (and probably others as well).
Btw., it would be great if the cursor changed to a colour picker in the document window as well if the picker is active.
Cheers
Burkhard.
If I open the panel with the preview section open, then the Colour Picker icon is highlighted, but it isn't active (and the highlighting disappears if I move the cursor on the icon).
EDIT: just noticed that this also happens in the Curves panel (and probably others as well).
Btw., it would be great if the cursor changed to a colour picker in the document window as well if the picker is active.
Cheers
Burkhard.
-
- Mitglied
- Beiträge: 2162
- Registriert: Sa 28 Sep 2013 01:25
Re: Req: Color to Transparency as layer "mask"
True, but I'm arguing that the Color to Transparency (as an adjustment layer) is a special case and ought to be created as a child layer of the image layer:bkh hat geschrieben:Remember, an adjustment layer on the layer stack is supposed to work on the combined image below it, not just on the image layer below it. If you want to apply it to a single layer, just use it as a child layer (or create an isolated group).
- I can't think of a scenario where or how Color to Transparency would be wanted to be applied to the combined layer stack below it.
- You are absolutely correct about the expectation of achieving transparency.
- New users will be utterly lost -- they'll never think of dragging the CtT adjustment layer down to become a child layer.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
-
- Mitglied
- Beiträge: 736
- Registriert: Di 19 Dez 2006 19:54
- Wohnort: München
Re: Neue Testversion 18.90b1
Hallo,
- Wenn man eine Ebenenmaske erstellt wird diese sofort gesperrt (blaue Anfasser) - man kann dies wieder abschalten, ich empfinde es aber als etwas verwirrend.
- Drag&Drop könnte optional eine Platzhaler eben erstellen (Drag mit rechter Maustaste?)
- Es gibt noch keine einfache Möglichkeit für Platzhalter einen Beschnitt zu erstellen. Ich hatte mal eine Aktion gepostet, die macht dies für eine Ebene.
Nachteil: Man muss diese Aktion erstmal finden, installieren und ausführen. Wünschenswert wäre es, für alle ausgewählten Platzhalter einen Beschnitt über das Menü anlagen zu können. (Ohne die Möglichkeit den Inhalt der Platzhalter zu beschneiden und zu zoomen ist Ihr Nutzwert stark eingeschränkt - nur mit Beschnitt Ebene hat man diese Möglichkeiten).
Grüsse,
Julian
- Wenn man eine Ebenenmaske erstellt wird diese sofort gesperrt (blaue Anfasser) - man kann dies wieder abschalten, ich empfinde es aber als etwas verwirrend.
- Drag&Drop könnte optional eine Platzhaler eben erstellen (Drag mit rechter Maustaste?)
- Es gibt noch keine einfache Möglichkeit für Platzhalter einen Beschnitt zu erstellen. Ich hatte mal eine Aktion gepostet, die macht dies für eine Ebene.
Nachteil: Man muss diese Aktion erstmal finden, installieren und ausführen. Wünschenswert wäre es, für alle ausgewählten Platzhalter einen Beschnitt über das Menü anlagen zu können. (Ohne die Möglichkeit den Inhalt der Platzhalter zu beschneiden und zu zoomen ist Ihr Nutzwert stark eingeschränkt - nur mit Beschnitt Ebene hat man diese Möglichkeiten).
Grüsse,
Julian
-
- Betatester
- Beiträge: 3674
- Registriert: Do 26 Nov 2009 22:59
Re: Req: Color to Transparency as layer "mask"
OK, got your point now – you would just like to change the default to create a child layer. Maybe that would be a good default for any adjustment layer (especially since adjustment layers are created to cover just the underlying layer, so that, in some sense, they only work on the layer below) – I'd much prefer a consistent behaviour for all adjustment layers. Indeed, you'd probably only want to create a child layer if the current layer isn't an adjustment layer or a layer mask (or some such rule).photoken hat geschrieben: True, but I'm arguing that the Color to Transparency (as an adjustment layer) is a special case and ought to be created as a child layer of the image layer:
As far as I remember, there was a technical reason for PL's current behaviour (which is to be either in "create normal adjustment mode" or "create child layers" mode) – before that, a newly created adjustment layer always was a normal layer, and you had to click the "chain" button to make it a child layer.
Cheers
Burkhard.
-
- Mitglied
- Beiträge: 258
- Registriert: Do 20 Nov 2008 17:56
Re: Req: Color to Transparency as layer "mask"
I think you mean "layers". The default behaviour (use the characteristics of the last usage) of adjustment layers should not be changed so that everyone can work in that way how he likes to work.bkh hat geschrieben:...(especially since adjustment layers are created to cover just the underlying layer, ...
@photoken:
I understand the usage slightly different. You can use "Color to Transparency" e.g. as "Show and Clip" Layer Mask. That means you create the "Color to Transparency" adjustment layer as you did already, "transform it to previous" (see Layer Mask) and then change from a "Clip" to a "Show and Clip" type.
The result is the same as using a 'Chain* directly but a little bit more complex to create. The point is, this adjustment layer needs a dedicated layer to add transparency to.
-
- Mitglied
- Beiträge: 258
- Registriert: Do 20 Nov 2008 17:56
Re: Neue Testversion 18.90b1
Noch eine Frage zu "Color to Transparency":
Bzgl der Box links unten (keine Ahnung wie man sie nennt):
- Was zeigt die x-Achse?
- Warum kann man die Schieber nicht komplett zusammenschieben? Der Minimalabstand scheint 10% zu sein.
Bzgl der Box links unten (keine Ahnung wie man sie nennt):
- Was zeigt die x-Achse?
- Warum kann man die Schieber nicht komplett zusammenschieben? Der Minimalabstand scheint 10% zu sein.
-
- Entwickler
- Beiträge: 4176
- Registriert: Di 19 Nov 2002 15:49
Re: Neue Testversion 18.90b1
Die Deckungswerte im Bereich [0;1].Andreas87 hat geschrieben:Noch eine Frage zu "Color to Transparency":
Bzgl der Box links unten (keine Ahnung wie man sie nennt):
- Was zeigt die x-Achse?
Die Schieber komplett zusammenzuschieben ist - wie auch bei einem normalen Histogramm - sinnlos, weil man dadurch als Ergebnis einen einzelnen Wert bekommt. Wenn man das will, kann man das einfacher erreichen.Andreas87 hat geschrieben:- Warum kann man die Schieber nicht komplett zusammenschieben? Der Minimalabstand scheint 10% zu sein.
Überhaupt ist der ganze Sinn von "Farbe nach Transparenz" einen weichen Alphakanal zu erzeugen. Das ist bei einem 10%igen Mindestabstand schon nicht mehr gegeben, daher halte ich das für einen sinnvollen Mindestabstand.
Martin
-
- Entwickler
- Beiträge: 4176
- Registriert: Di 19 Nov 2002 15:49
Re: Neue Testversion 18.90b1
I can't reproduce that. How do you open the panels (via menu/shortcut/...)?bkh hat geschrieben:There's another small bug in "Color to Transparency", namely in the Colour Picker:
If I open the panel with the preview section open, then the Colour Picker icon is highlighted, but it isn't active (and the highlighting disappears if I move the cursor on the icon).
EDIT: just noticed that this also happens in the Curves panel (and probably others as well).
Well, it shows a color picker cursor here, but only after moving the mouse. I will examine that.bkh hat geschrieben:Btw., it would be great if the cursor changed to a colour picker in the document window as well if the picker is active.
Martin
-
- Betatester
- Beiträge: 3674
- Registriert: Do 26 Nov 2009 22:59
Re: Req: Color to Transparency as layer "mask"
No, the size of an adjustment layer is the size of the layer above which it was created (i.e., the layer that was active when you created it), not the (combined) size of the underlying layers.Andreas87 hat geschrieben:I think you mean "layers".bkh hat geschrieben:...(especially since adjustment layers are created to cover just the underlying layer, ...
Cheers
Burkhard.
-
- Betatester
- Beiträge: 3674
- Registriert: Do 26 Nov 2009 22:59
Re: Neue Testversion 18.90b1
Ah, this only happens if I open the panel via the adjustment layer icon in the Layer panel – also with a fresh PL (empty PhotoLine Settings folder). "New Adjustment layer" from the main menu works as expected.Martin Huber hat geschrieben:I can't reproduce that. How do you open the panels (via menu/shortcut/...)?bkh hat geschrieben:If I open the panel with the preview section open, then the Colour Picker icon is highlighted, but it isn't active (and the highlighting disappears if I move the cursor on the icon).
EDIT: just noticed that this also happens in the Curves panel (and probably others as well).
Cursors seem to work as expected when using a new PhotoLineSettings folder – so probably there's something messed up in my preferences. I'll see if I can spot something here.Martin Huber hat geschrieben:Well, it shows a color picker cursor here, but only after moving the mouse. I will examine that.bkh hat geschrieben:Btw., it would be great if the cursor changed to a colour picker in the document window as well if the picker is active.
Cheers
Burkhard.
Zuletzt geändert von bkh am Mi 24 Sep 2014 16:16, insgesamt 1-mal geändert.
-
- Entwickler
- Beiträge: 4176
- Registriert: Di 19 Nov 2002 15:49
Re: Neue Testversion 18.90b1
I will check that.bkh hat geschrieben:Ah, this only happens if I open the panel via the adjustment layer icon in the Layer panel – also with a fresh PL (empty PhotoLine Settings folder). "New Adjustment layer" from the main menu works as expected.
Martin