Gerhard Huber hat geschrieben: ↑Mi 17 Jul 2019 09:10
ich denke, hoffe mal, die ist auf dem Stand der 21.50
Hallo Gerhard,
das halte ich für unwahrscheinlich, da das PDF als Datum den 16.06.2018 hat.
Dies ist noch nicht die Aktuelle Version 21.50
Gruss Christopher
IMatch zur Bilderverwaltung, Capture One und DxO PhotoLab
als RAW-Converter und PhotoLine (x64) zur Bildbearbeitung.
Es geht auch sehr gut ohne Abobe Produkte und Adobe's Abomodell.
Betriebssystem Windows 11 22H2
Gerhard Huber hat geschrieben: ↑Mi 17 Jul 2019 08:52
[*] Kurveneingabe, Vektorpunkte bearbeiten: Es werden Automatische Hilfslinien für den aktiven Pfad erzeugt
Christopher hat geschrieben: ↑Mi 17 Jul 2019 09:46
das halte ich für unwahrscheinlich, da das PDF als Datum den 16.06.2018 hat.
Dies ist noch nicht die Aktuelle Version 21.50
Gerhard Huber hat geschrieben: ↑Mi 17 Jul 2019 11:15
ich werde die zur nächsten Beta austauschen.
DANKE
Gruss Christopher
IMatch zur Bilderverwaltung, Capture One und DxO PhotoLab
als RAW-Converter und PhotoLine (x64) zur Bildbearbeitung.
Es geht auch sehr gut ohne Abobe Produkte und Adobe's Abomodell.
Betriebssystem Windows 11 22H2
gmhofmann hat geschrieben: ↑Do 18 Jul 2019 12:17
Dann sollte das auch drinstehen
Eigentlich sollte da 21.5 stehen. Keine Ahnung, warum das nicht so ist.
Es ist aber die neue Online-Hilfe, weil neue Sachen z.B. die Zeichenmatrix darin erklärt sind.
I just noticed that when using the Liquify Tool an adjustment layer is added making this tool non-destructive (while some others brag about their liquify tool in a destructive way), why then this tool is not present as an Adjustment Layer over the Adjustment Layer list?
Juan hat geschrieben: ↑Fr 19 Jul 2019 18:45I just noticed that when using the Liquify Tool an adjustment layer is added making this tool non-destructive (while some others brag about their liquify tool in a destructive way), why then this tool is not present as an Adjustment Layer over the Adjustment Layer list?
Liquify isn't listed in the Adjustment dialog mostly because of performance reasons.
Juan hat geschrieben: ↑Fr 19 Jul 2019 18:45I just noticed that when using the Liquify Tool an adjustment layer is added making this tool non-destructive (while some others brag about their liquify tool in a destructive way), why then this tool is not present as an Adjustment Layer over the Adjustment Layer list?
Liquify isn't listed in the Adjustment dialog mostly because of performance reasons.
I see, thanks for the explanation.
Is there room for improvement on this tool to overcome it? You have a really strong selling point here with this tool.
I think the Measurement tool is not working properly. I set my drawing scale and when I measure it to make sure if it is ok, the measurement keeps showing me the distance from before setting the scale.
Measurement.jpg
Cheers,
Juan
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.