HI.
Change RGB to the Lab mode on the layer.
On the monitor, the image changes - in the shadows darkens.
Like the SoftProof mode.
(win7)
Change RGB -> LAB display difference
-
- Mitglied
- Beiträge: 84
- Registriert: Di 23 Jan 2018 10:06
- Wohnort: Russia
-
- Entwickler
- Beiträge: 4176
- Registriert: Di 19 Nov 2002 15:49
Re: Change RGB -> LAB display difference
Do you still work with color management turned off?
If so: What do you expect when converting a a non-color managed color space to a color managed one?
And then soft-proofing the color managed one whithout color manangement?
I think it is best to remove the option to turn off color management. It only leads to trouble.
If you then to work without color management, you will have to use the screen profile as default RGB profile/document profile. And all other color spaces will work as expected.
Martin
-
- Mitglied
- Beiträge: 84
- Registriert: Di 23 Jan 2018 10:06
- Wohnort: Russia
Re: Change RGB -> LAB display difference
Color management = ON !!Martin Huber hat geschrieben: ↑Mo 29 Nov 2021 11:19
Do you still work with color management turned off?
I think it is best to remove the option to turn off color management. It only leads to trouble.
Martin
Please, DO NOT DELETE Color management = OFF !!
I print with the Color Management turned off, convert from outside with Argyll CMS.
The problem is observed in Win7, I did not notice in Win10.
-
- Mitglied
- Beiträge: 84
- Registriert: Di 23 Jan 2018 10:06
- Wohnort: Russia
Re: Change RGB -> LAB display difference
Color Management = ON. SoftProof = OFF.Martin Huber hat geschrieben: ↑Mo 29 Nov 2021 11:19 If so: What do you expect when converting a a non-color managed color space to a color managed one?
And then soft-proofing the color managed one whithout color manangement?
Martin
RGB -> LAB >>>>> display change.