Neue Testversion 19.40b18
-
- Entwickler
- Beiträge: 4145
- Registriert: Mo 18 Nov 2002 15:30
- Wohnort: Bad Gögging
Neue Testversion 19.40b18
Hallo,
es gibt wieder eine neue Testversion 19.40b18.
Windows:
http://www.pl32.com/beta/pl1940b18.zip
Mac OS:
http://www.pl32.com/beta/plx1940b18.zip
Neues:
letzte Bugfixes, wir werden die Version 19.50 noch diese Woche releasen.
es gibt wieder eine neue Testversion 19.40b18.
Windows:
http://www.pl32.com/beta/pl1940b18.zip
Mac OS:
http://www.pl32.com/beta/plx1940b18.zip
Neues:
letzte Bugfixes, wir werden die Version 19.50 noch diese Woche releasen.
-
- Mitglied
- Beiträge: 2162
- Registriert: Sa 28 Sep 2013 01:25
Fixed: Pasting into Pattern List
The problem with PL crashing when a vector pattern is pasted into the Pattern List:
http://www.pl32.com/forum3/viewtopic.ph ... 169#p38683
has been fixed. Thanks!
http://www.pl32.com/forum3/viewtopic.ph ... 169#p38683
has been fixed. Thanks!
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
-
- Mitglied
- Beiträge: 2162
- Registriert: Sa 28 Sep 2013 01:25
Fixed: Vector line as pattern
The problem with a vector line pattern behaving erratically when the pattern is rotated:
http://www.pl32.com/forum3/viewtopic.ph ... =30#p38732
seems to have been fixed.
But, the vector fill pattern is sensitive to the height of the fill: The second screenshot shows a noticeable blurring of the edges of the pattern.
(The vertical line in the document was copied and pasted into the Pattern List to create the fill.)
This zip file contains the PLD file and the vector fill pattern used:
http://www.pl32.com/forum3/viewtopic.ph ... =30#p38732
seems to have been fixed.
But, the vector fill pattern is sensitive to the height of the fill: The second screenshot shows a noticeable blurring of the edges of the pattern.
(The vertical line in the document was copied and pasted into the Pattern List to create the fill.)
This zip file contains the PLD file and the vector fill pattern used:
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Zuletzt geändert von photoken am Mi 14 Sep 2016 08:56, insgesamt 1-mal geändert.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
-
- Mitglied
- Beiträge: 2172
- Registriert: Sa 12 Mai 2012 21:38
Re: Neue Testversion 19.40b18
Thanks, HDR and EXR works now. The intensity values also seem to be correctly indicated now.
Martin, were you able to figure out what was happening with the EXR library? Is it full float now? (I think it is?)
Martin, were you able to figure out what was happening with the EXR library? Is it full float now? (I think it is?)
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
-
- Entwickler
- Beiträge: 4145
- Registriert: Mo 18 Nov 2002 15:30
- Wohnort: Bad Gögging
Re: Neue Testversion 19.40b18
sorry, but the problem was on PhotoLines site, so I didn't check the OpenEXR library. I don't really know what is going on inside the library.Herbert123 hat geschrieben:Martin, were you able to figure out what was happening with the EXR library? Is it full float now? (I think it is?)
-
- Mitglied
- Beiträge: 2172
- Registriert: Sa 12 Mai 2012 21:38
Re: Neue Testversion 19.40b18
Well, the values seem to be correct now. When I open a full float in Photoshop, only the half float values are read - anything beyond half float is clipped (this is a known issue).Gerhard Huber hat geschrieben:sorry, but the problem was on PhotoLines site, so I didn't check the OpenEXR library. I don't really know what is going on inside the library.Herbert123 hat geschrieben:Martin, were you able to figure out what was happening with the EXR library? Is it full float now? (I think it is?)
When I do the same in Photoline, the values are not clipped. I do get a max value in the render.exr window area?
What I wonder about, is the number display: the larger numbers do not fit. It would be nice if the color picker would accommodate longer numbers, or perhaps, as was suggested before, the scientific notation is used.
Anyway, thank you very much for the quick improvements. Much appreciated.
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
-
- Mitglied
- Beiträge: 2172
- Registriert: Sa 12 Mai 2012 21:38
Re: Neue Testversion 19.40b18
Layer search works again! Thanks!
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
-
- Mitglied
- Beiträge: 66
- Registriert: So 04 Okt 2009 02:36
Re: Neue Testversion 19.40b18
Ich habe erfreut festgestellt, dass Zielfarbenauswahl mit CTRL bzw. CMD zumindest für Schwarz und Weiß
jetzt möglich ist und (im Gegensatz zur 19.03 Win) auf unserem Mac mit der Beta zu funktionieren scheint.
Super.
Allerdings ist eine wichtige Sache noch nicht bedacht. Das ist eine Einstellung, die man im Allgemeinen selten ändert
(z.B. 1* auf 20,20,20 und 245,245,245 fuer Schwarz- und Weiß-Zielfarbe und das will man ja nicht jedesmal eintippen)
Darum wäre es super, wenn das System sich den letzten Wert merken würde.
Super wären Einträge für die zwei bzw. drei Farbwerte in den zentralen Einstellungen, die beim lokalen Verändern der Zielfarben
jeweils geändert würden und initial die Werte 0,0,0 und 255,255,255 haben, einfach merken ist aber schonmal ein Anfang
jetzt möglich ist und (im Gegensatz zur 19.03 Win) auf unserem Mac mit der Beta zu funktionieren scheint.
Super.
Allerdings ist eine wichtige Sache noch nicht bedacht. Das ist eine Einstellung, die man im Allgemeinen selten ändert
(z.B. 1* auf 20,20,20 und 245,245,245 fuer Schwarz- und Weiß-Zielfarbe und das will man ja nicht jedesmal eintippen)
Darum wäre es super, wenn das System sich den letzten Wert merken würde.
Super wären Einträge für die zwei bzw. drei Farbwerte in den zentralen Einstellungen, die beim lokalen Verändern der Zielfarben
jeweils geändert würden und initial die Werte 0,0,0 und 255,255,255 haben, einfach merken ist aber schonmal ein Anfang
-
- Mitglied
- Beiträge: 20
- Registriert: Fr 12 Sep 2014 16:58
Re: Neue Testversion 19.40b18
Windows 10 64Bit
Bei Auswahl eines Bitmap-Pinsels wird
a) der Regler für den inneren Radius daktiviert
b) die Intensitätskurve ausgeblendet.
Dies betrifft den Pinseleditor, wie den Pinseleditor aus Ansicht-Listen-Pinseleditor.
Wenn nun wieder ein normaler Pinsel gewählt wird, so sollen a) und b) wieder rückgängig gemacht werden.
Dies war in der Version 19.40b17 jedoch nur für den Pinseleditor wirksam, nicht für den aus Ansicht-Listen-Pinseleditor.
Dies wurde für a) in der Version 19.40b18 behoben, b) jedoch bleibt weiterhin ausgeblendet.
Hatti
Bei Auswahl eines Bitmap-Pinsels wird
a) der Regler für den inneren Radius daktiviert
b) die Intensitätskurve ausgeblendet.
Dies betrifft den Pinseleditor, wie den Pinseleditor aus Ansicht-Listen-Pinseleditor.
Wenn nun wieder ein normaler Pinsel gewählt wird, so sollen a) und b) wieder rückgängig gemacht werden.
Dies war in der Version 19.40b17 jedoch nur für den Pinseleditor wirksam, nicht für den aus Ansicht-Listen-Pinseleditor.
Dies wurde für a) in der Version 19.40b18 behoben, b) jedoch bleibt weiterhin ausgeblendet.
Hatti
-
- Mitglied
- Beiträge: 2162
- Registriert: Sa 28 Sep 2013 01:25
Prob: Vector pattern does not maintain alignment
Win7 Pro x64 SP1
PL 19.40b18 x64
When "Align Pattern" is selected for a vector shape containing a vector fill pattern, the pattern's alignment within the shape changes.
Steps to reproduce:
The vector fill pattern changes its alignment with respect to the shape: The vector fill was created by copying the circle in the document to the Pattern List.
This zip file contains both the sample PLD file and the vector fill pattern:
PL 19.40b18 x64
When "Align Pattern" is selected for a vector shape containing a vector fill pattern, the pattern's alignment within the shape changes.
Steps to reproduce:
- Apply a vector fill pattern to a vector shape.
- Use the Layer tool to move the vector shape so the pattern is aligned within the shape:
- Apply the "Align Pattern" option in the Layer Properties for the shape layer:
The vector fill pattern changes its alignment with respect to the shape: The vector fill was created by copying the circle in the document to the Pattern List.
This zip file contains both the sample PLD file and the vector fill pattern:
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
-
- Mitglied
- Beiträge: 2172
- Registriert: Sa 12 Mai 2012 21:38
Re: Neue Testversion 19.40b18
That has always been the case. First turn on "align pattern" before you adjust the pattern if you wish to move the object later and keep the pattern position.When "Align Pattern" is selected for a vector shape containing a vector fill pattern, the pattern's alignment within the shape changes.
But it is probably better for the workflow if they are made to match - I have made the mistake of forgetting to check "align pattern", then change the position of the pattern, only to find I had to do it a second time.
/*---------------------------------------------*/
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
System: Win10 64bit - i7 920@3.6Ghz, p6t Deluxe v1, 48gb (6x8gb RipjawsX), Nvidia GTX1080 8GB, Revodrive X2 240gb, e-mu 1820, 2XSamsung SA850 (2560*1440) and 1XHP2408H 1920*1200 portrait
-
- Mitglied
- Beiträge: 379
- Registriert: So 06 Jul 2014 23:02
Re: Neue Testversion 19.40b18
Bei mir geht das beides problemlos unter Windows 7. Vielleicht mal mit zurückgesetzten Einstellungen probieren?Onkel Hatti hat geschrieben:Dies wurde für a) in der Version 19.40b18 behoben, b) jedoch bleibt weiterhin ausgeblendet.
In my opinion this makes sense because "align pattern" changes the reference point from the layer to the document (or something similar). All patterns work that way. But to be honest: When I watched it the first time (years ago), i was wondering, too.photoken hat geschrieben: When "Align Pattern" is selected for a vector shape containing a vector fill pattern, the pattern's alignment within the shape changes.
-
- Mitglied
- Beiträge: 2162
- Registriert: Sa 28 Sep 2013 01:25
Re: Neue Testversion 19.40b18
Except that in PL 19.03, there is no way to align the pattern within the shape and keep that alignment when the shape is moved.Herbert123 hat geschrieben:That has always been the case. First turn on "align pattern" before you adjust the pattern if you wish to move the object later and keep the pattern position.When "Align Pattern" is selected for a vector shape containing a vector fill pattern, the pattern's alignment within the shape changes.
If the new vector fill and widgets are implemented in the next public release of PL, then it's somewhat of a moot point.
Yes, I think it would be much better to have that consistency.Herbert123 hat geschrieben:But it is probably better for the workflow if they are made to match - I have made the mistake of forgetting to check "align pattern", then change the position of the pattern, only to find I had to do it a second time.
Yes, it's consistency that I'm looking for.Eurgail hat geschrieben:But to be honest: When I watched it the first time (years ago), i was wondering, too.
Ken
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
Yes, I think it can be eeeeeasily done....
Just take everything out on Highway 61.
-
- Mitglied
- Beiträge: 379
- Registriert: So 06 Jul 2014 23:02
Re: Neue Testversion 19.40b18
Of course. At the same position as now: in the layer dialog.photoken hat geschrieben:Except that in PL 19.03, there is no way to align the pattern within the shape and keep that alignment when the shape is moved.
Yes, I understand, but if you watch the behavior of the layer effects (and change the reference from layer to group to page), the current way is technically consistent, isn't it?photoken hat geschrieben:Yes, it's consistency that I'm looking for.
But you are right, too. I'm really torn here.
Something completely different:
There is a problem, when exporting distorted layers with the special type of layer effects, that doesn't render in the basis layer, into PDF. (Only in the beta, see attachement)
P.S.: Only concerned to vector layers.
Du hast keine ausreichende Berechtigung, um die Dateianhänge dieses Beitrags anzusehen.
-
- Mitglied
- Beiträge: 20
- Registriert: Fr 12 Sep 2014 16:58
Re: Neue Testversion 19.40b18
Wie setze ich die Einstellungen zurück? Ich habs grad noch mal probiert - geht nicht.Eurgail hat geschrieben:Bei mir geht das beides problemlos unter Windows 7. Vielleicht mal mit zurückgesetzten Einstellungen probieren?Onkel Hatti hat geschrieben:Dies wurde für a) in der Version 19.40b18 behoben, b) jedoch bleibt weiterhin ausgeblendet.
Was ich tue:
Ich öffne den Pinseleditor mit ALT+STRG+UMSCHALT+E
Ich öffne ein Bild.
Voreingestellter Pinsel: irgendein normaler. Im Pinseleditor wird die Kurve angezeigt und der innere Radiusregler ist aktiviert.
Jetzt ein Bitmap Pinsel wählen.
Im Pinseleditor verschwindet die Kurve und der innere Radius Regler wird inaktiv.
Nun wieder einen normalen Pinsel wählen.
Der innere Radius Regler wird wieder aktiv, die Kurve erscheint jedoch nicht.
Das passiert nur bei dem Pinseleditor, der über ALT+STRG+UMSCHALT+E sichtbar wird. Es gibt ja noch einen zweiten Pinseleditor, der erscheint, wenn man zweimal auf den Pinsel klickt. Der funktioniert wie gewünscht, ist allerdings (teil)modal, d.h. man kann nicht malen, solange der Pinseleditor geöffnet ist.
Gruß
Hatti